The #1 upgrade for an overworked AC — encapsulate the attic and feel the difference fast. Serving Fort Worth and the surrounding DFW metroplex.

If you live or run a business in Fort Worth, you already know what a Texas summer does to an under-insulated building. In Texas, your attic can hit 140°F and dump that heat straight into your living space. Encapsulating the attic with spray foam brings it inside your home's thermal envelope, takes the load off your AC, and evens out every room.
Fort Worth's mix of historic and new-build homes both benefit from a proper air seal against the West Texas heat. DFW Spray Foam has served Fort Worth since 2013 — we'll inspect your space, recommend open-cell or closed-cell, and install it clean so you feel the difference right away.
Spray foam expands to seal every gap and crack — the air leaks fiberglass batts leave wide open. That air seal is where the comfort and the savings come from.
A tight air seal can cut heating & cooling costs up to 40% — month after month.
No more bonus room that bakes in July. Foam keeps every room comfortable.
Foam blocks outside noise and helps keep dust, pollen, and humidity out.
The things Fort Worth homeowners and building owners actually ask us before booking. If yours isn't here, call (469) 434-4596 and ask.
Most Fort Worth attic encapsulations run $4,000 to $9,000 — call it $1.50 to $3.50 per square foot of attic surface. What moves the number is roofline square footage, foam depth, and whether old insulation has to come out first. Free estimate, on site, no pressure.
For Fort Worth homes, the roofline, nearly every time. Insulating the floor leaves your attic at 140°F in August with your ductwork and air handler sitting in it, which is why your AC never catches up. Foaming the underside of the roof deck brings the attic inside the conditioned envelope and drops it to within a few degrees of the house.
This is the objection we hear most, and it's worth taking seriously. A sealed attic done wrong can trap moisture. Done right — correct foam type, correct thickness for our climate zone, and combustion appliances properly addressed — it performs better than a vented attic in North Texas humidity, because you've stopped pulling damp outside air into the space in the first place. Ask any contractor how they're handling it; if they don't have an answer, keep calling.
In most cases yes. Foam has to bond to a clean deck, and old blown-in or batt material sitting on the attic floor doesn't do anything useful once the roofline is sealed — it just holds dust and, in a lot of Fort Worth attics, rodent mess. We remove and dispose of it as part of the job.
Immediately, in a way people usually describe as the house getting quiet. The AC stops running constantly and the upstairs rooms stop being five to ten degrees hotter than the thermostat says. The bill catches up on the next cycle.
Still deciding? Estimates are free, same-day, and there's no pressure at the end of them. Get a free estimate
Get a free, same-day spray foam estimate from a family-owned DFW crew.
