Attic & Roofline Insulation in Plano, TX

The #1 upgrade for an overworked AC — encapsulate the attic and feel the difference fast. Serving Plano and the surrounding DFW metroplex.

Attic & Roofline Insulation in Plano, TX
🪜 Attic & Roofline · Plano

Attic & Roofline Insulation for Plano homes & businesses

Plano property owners call us for one reason: spray foam that actually lowers the bill and evens out the temperature. In Texas, your attic can hit 140°F and dump that heat straight into your living space. Encapsulating the attic with spray foam brings it inside your home's thermal envelope, takes the load off your AC, and evens out every room.

Plano's large two-story homes are notorious for hot upstairs bonus rooms — attic encapsulation is the cure. DFW Spray Foam has served Plano since 2013 — we'll inspect your space, recommend open-cell or closed-cell, and install it clean so you feel the difference right away.

  • Full attic encapsulation
  • Roofline (underside of decking) foam
  • Removes the attic heat load
  • Protects HVAC & ductwork in the attic
  • Open-cell or closed-cell as needed
The Spray Foam Difference

Why spray foam beats old fiberglass

Spray foam expands to seal every gap and crack — the air leaks fiberglass batts leave wide open. That air seal is where the comfort and the savings come from.

💸

Lower energy bills

A tight air seal can cut heating & cooling costs up to 40% — month after month.

🌡️

Even temperatures

No more bonus room that bakes in July. Foam keeps every room comfortable.

🍃

Quieter & healthier

Foam blocks outside noise and helps keep dust, pollen, and humidity out.

Straight Answers

Attic & Roofline in Plano — common questions

The things Plano homeowners and building owners actually ask us before booking. If yours isn't here, call (469) 434-4596 and ask.

How much does attic insulation cost in Plano?

Most Plano attic encapsulations run $4,000 to $9,000 — call it $1.50 to $3.50 per square foot of attic surface. What moves the number is roofline square footage, foam depth, and whether old insulation has to come out first. Free estimate, on site, no pressure.

Should I insulate the attic floor or the roofline?

For Plano homes, the roofline, nearly every time. Insulating the floor leaves your attic at 140°F in August with your ductwork and air handler sitting in it, which is why your AC never catches up. Foaming the underside of the roof deck brings the attic inside the conditioned envelope and drops it to within a few degrees of the house.

Will encapsulating my attic cause moisture problems?

This is the objection we hear most, and it's worth taking seriously. A sealed attic done wrong can trap moisture. Done right — correct foam type, correct thickness for our climate zone, and combustion appliances properly addressed — it performs better than a vented attic in North Texas humidity, because you've stopped pulling damp outside air into the space in the first place. Ask any contractor how they're handling it; if they don't have an answer, keep calling.

Do I need to remove my old attic insulation first?

In most cases yes. Foam has to bond to a clean deck, and old blown-in or batt material sitting on the attic floor doesn't do anything useful once the roofline is sealed — it just holds dust and, in a lot of Plano attics, rodent mess. We remove and dispose of it as part of the job.

How fast will I notice a difference?

Immediately, in a way people usually describe as the house getting quiet. The AC stops running constantly and the upstairs rooms stop being five to ten degrees hotter than the thermostat says. The bill catches up on the next cycle.

Still deciding? Estimates are free, same-day, and there's no pressure at the end of them. Get a free estimate

Comfort you can feel. Savings you can see.

Get a free, same-day spray foam estimate from a family-owned DFW crew.