Closed-Cell Spray Foam Insulation in Murphy, TX

Dense, high-R foam that insulates, air-seals, and blocks moisture — built for Texas heat and humidity. Serving Murphy and the surrounding DFW metroplex.

Closed-Cell Spray Foam Insulation in Murphy, TX
🛡️ Closed-Cell Spray Foam · Murphy

Closed-Cell Spray Foam Insulation for Murphy homes & businesses

For Murphy homes and buildings, the fastest path to comfort and lower energy costs runs through a proper air seal. Closed-cell spray foam is dense and rigid, delivering the highest R-value per inch plus a built-in moisture and vapor barrier — and it even adds structural strength. It's the go-to for crawl spaces, metal buildings, exterior walls, and anywhere moisture control matters across Dallas–Fort Worth.

Murphy's family homes stay quieter and more even-tempered once the attic is sealed with foam. DFW Spray Foam has served Murphy since 2013 — we'll inspect your space, recommend open-cell or closed-cell, and install it clean so you feel the difference right away.

  • Highest R-value per inch
  • Built-in moisture & vapor barrier
  • Adds structural rigidity
  • Ideal for crawl spaces, metal & exterior walls
  • Stands up to Texas heat & humidity
The Spray Foam Difference

Why spray foam beats old fiberglass

Spray foam expands to seal every gap and crack — the air leaks fiberglass batts leave wide open. That air seal is where the comfort and the savings come from.

💸

Lower energy bills

A tight air seal can cut heating & cooling costs up to 40% — month after month.

🌡️

Even temperatures

No more bonus room that bakes in July. Foam keeps every room comfortable.

🍃

Quieter & healthier

Foam blocks outside noise and helps keep dust, pollen, and humidity out.

Straight Answers

Closed-Cell Spray Foam in Murphy — common questions

The things Murphy homeowners and building owners actually ask us before booking. If yours isn't here, call (469) 434-4596 and ask.

How much does closed-cell spray foam cost in Murphy?

Closed-cell runs about $1.00 to $1.50 per board foot — roughly $2.50 to $4.50 per square foot installed on most Murphy jobs. It costs more than open-cell because it's a denser, higher-performing material. Where moisture is in play, it's the one worth paying for.

What's the R-value of closed-cell spray foam?

R-6 to R-7 per inch — the highest of any insulation we install. That density is why it's the answer when you don't have depth to work with: two inches in an exterior wall cavity gets you R-12 to R-14 plus a vapor barrier, in a space where open-cell couldn't reach the same number.

Do I still need a separate vapor barrier with closed-cell foam?

No. At about 1.5 inches and above, closed-cell is its own vapor retarder — one of the real advantages in Murphy's humidity. It removes a material, a labor step, and a detail that gets installed wrong more often than not.

Where should I use closed-cell instead of open-cell?

Crawl spaces, metal buildings, rim joists, exterior walls with shallow cavities, and anywhere condensation or bulk water is a genuine risk. In a standard Murphy attic roofline with room to spray, open-cell usually gives you better value. We'd rather put you in the right one than the expensive one.

Does closed-cell spray foam add structural strength?

It does — once cured it bonds sheathing to framing and measurably increases racking resistance in walls and metal buildings. Treat it as a bonus rather than a reason to choose it; the moisture barrier and the R-value per inch are the reasons that should decide it.

Still deciding? Estimates are free, same-day, and there's no pressure at the end of them. Get a free estimate

Comfort you can feel. Savings you can see.

Get a free, same-day spray foam estimate from a family-owned DFW crew.