Closed-Cell Spray Foam Insulation

Dense, high-R foam that insulates, air-seals, and blocks moisture — built for Texas heat and humidity.

Closed-Cell Spray Foam Insulation in Dallas–Fort Worth
🛡️ Spray Foam

Closed-Cell Spray Foam Insulation

Closed-cell spray foam is dense and rigid, delivering the highest R-value per inch plus a built-in moisture and vapor barrier — and it even adds structural strength. It's the go-to for crawl spaces, metal buildings, exterior walls, and anywhere moisture control matters across Dallas–Fort Worth.

  • Highest R-value per inch
  • Built-in moisture & vapor barrier
  • Adds structural rigidity
  • Ideal for crawl spaces, metal & exterior walls
  • Stands up to Texas heat & humidity
The Spray Foam Difference

Why spray foam beats old fiberglass

Spray foam expands to seal every gap and crack — the air leaks fiberglass batts leave wide open. That air seal is where the comfort and the savings come from.

💸

Lower energy bills

A tight air seal can cut heating & cooling costs up to 40% — month after month.

🌡️

Even temperatures

No more bonus room that bakes in July. Foam keeps every room comfortable.

🍃

Quieter & healthier

Foam blocks outside noise and helps keep dust, pollen, and humidity out.

Where We Work

Serving the entire DFW metroplex

Proudly insulating homes and businesses across Dallas–Fort Worth and the surrounding cities.

Straight Answers

Closed-Cell Spray Foam in Dallas–Fort Worth — common questions

The things Dallas–Fort Worth homeowners and building owners actually ask us before booking. If yours isn't here, call (469) 434-4596 and ask.

How much does closed-cell spray foam cost in Dallas–Fort Worth?

Closed-cell runs about $1.00 to $1.50 per board foot — roughly $2.50 to $4.50 per square foot installed on most Dallas–Fort Worth jobs. It costs more than open-cell because it's a denser, higher-performing material. Where moisture is in play, it's the one worth paying for.

What's the R-value of closed-cell spray foam?

R-6 to R-7 per inch — the highest of any insulation we install. That density is why it's the answer when you don't have depth to work with: two inches in an exterior wall cavity gets you R-12 to R-14 plus a vapor barrier, in a space where open-cell couldn't reach the same number.

Do I still need a separate vapor barrier with closed-cell foam?

No. At about 1.5 inches and above, closed-cell is its own vapor retarder — one of the real advantages in Dallas–Fort Worth's humidity. It removes a material, a labor step, and a detail that gets installed wrong more often than not.

Where should I use closed-cell instead of open-cell?

Crawl spaces, metal buildings, rim joists, exterior walls with shallow cavities, and anywhere condensation or bulk water is a genuine risk. In a standard Dallas–Fort Worth attic roofline with room to spray, open-cell usually gives you better value. We'd rather put you in the right one than the expensive one.

Does closed-cell spray foam add structural strength?

It does — once cured it bonds sheathing to framing and measurably increases racking resistance in walls and metal buildings. Treat it as a bonus rather than a reason to choose it; the moisture barrier and the R-value per inch are the reasons that should decide it.

Still deciding? Estimates are free, same-day, and there's no pressure at the end of them. Get a free estimate

Before You Decide

Worth reading first

We'd rather you booked this knowing what you're buying. No sign-up, no email gate — just the guides.

Comfort you can feel. Savings you can see.

Get a free, same-day spray foam estimate from a family-owned DFW crew.