Metal buildings, warehouses, and shops sealed against Texas heat, humidity, and condensation. Serving Irving and the surrounding DFW metroplex.

If you live or run a business in Irving, you already know what a Texas summer does to an under-insulated building. Metal buildings sweat, bake, and leak energy. Closed-cell spray foam stops condensation, adds structural rigidity, and dramatically reduces the heat load — making warehouses and shops usable and affordable to condition.
From Las Colinas offices to Irving homes, foam stabilizes temperatures and lowers operating costs. DFW Spray Foam has served Irving since 2013 — we'll inspect your space, recommend open-cell or closed-cell, and install it clean so you feel the difference right away.
Spray foam expands to seal every gap and crack — the air leaks fiberglass batts leave wide open. That air seal is where the comfort and the savings come from.
A tight air seal can cut heating & cooling costs up to 40% — month after month.
No more bonus room that bakes in July. Foam keeps every room comfortable.
Foam blocks outside noise and helps keep dust, pollen, and humidity out.
The things Irving homeowners and building owners actually ask us before booking. If yours isn't here, call (469) 434-4596 and ask.
Warehouses and industrial buildings in Irving usually run $2.50 to $5.00 per square foot, driven mostly by foam thickness and access — a clear-span building we can lift in is a very different job from one packed with racking and equipment. We'll quote from a walkthrough, free.
It's the main reason industrial clients call us. Closed-cell foam bonds directly to the steel and eliminates the cold surface that Irving humidity condenses on, so the dripping stops — no more wet inventory or rusting deck. It has to be closed-cell and it has to be thick enough to keep the panel above dew point; open-cell in that application will trap moisture and cause the problem it was supposed to fix.
Usually yes. We mask and protect what can't move and work in sections around what can't be shut down. It adds time compared to an empty building, and we'd rather tell you that in the estimate than discover it on day two.
Closed-cell does. Once it cures it bonds the panels to the framing and measurably stiffens the assembly against racking and wind load. It's a genuine secondary benefit, though we'd never sell it as a substitute for actual structural work.
For most Irving warehouses, two to three inches of closed-cell (roughly R-13 to R-21) handles condensation control and takes the bulk of the heat load off. Conditioned space, cold storage, or a building running equipment that throws heat will want more. We size it to how you actually use the building.
Still deciding? Estimates are free, same-day, and there's no pressure at the end of them. Get a free estimate
Get a free, same-day spray foam estimate from a family-owned DFW crew.
