Lightweight, expanding foam that air-seals and quiets your home — a cost-effective DFW favorite. Serving Arlington and the surrounding DFW metroplex.

Arlington property owners call us for one reason: spray foam that actually lowers the bill and evens out the temperature. Open-cell spray foam expands big to fill every gap, crack, and stud bay — sealing the air leaks fiberglass leaves behind and softening sound. It's an excellent, cost-effective choice for attics, interior walls, and ceilings where moisture control isn't the priority. We install it clean across the DFW metroplex.
Arlington's wide range of housing stock benefits from foam's all-in-one air seal and insulation. DFW Spray Foam has served Arlington since 2013 — we'll inspect your space, recommend open-cell or closed-cell, and install it clean so you feel the difference right away.
Spray foam expands to seal every gap and crack — the air leaks fiberglass batts leave wide open. That air seal is where the comfort and the savings come from.
A tight air seal can cut heating & cooling costs up to 40% — month after month.
No more bonus room that bakes in July. Foam keeps every room comfortable.
Foam blocks outside noise and helps keep dust, pollen, and humidity out.
The things Arlington homeowners and building owners actually ask us before booking. If yours isn't here, call (469) 434-4596 and ask.
Open-cell is the more affordable of the two foams — figure $0.44 to $0.65 per board foot, which for a typical Arlington attic works out to roughly $1.50 to $2.50 per square foot installed. It's usually the better value anywhere moisture control isn't the deciding factor.
About R-3.5 to R-3.8 per inch. That's lower per inch than closed-cell, but the comparison misses the point — open-cell expands to roughly 100 times its liquid volume and seals the air leaks that make fiberglass underperform its rating in the real world. In a Arlington attic at 5-6 inches you're at R-19 to R-21 with a genuine air seal.
It's the most common choice we install here, and for good reason: it's cost-effective, it air-seals extremely well, and it's vapor-permeable, so if the roof ever leaks the water shows up on your ceiling instead of hiding in the assembly. Roofers appreciate that too. Where we'd steer you to closed-cell instead is crawl spaces, metal buildings, and exterior walls in a tight cavity.
It can hold water if it's directly and repeatedly wetted, which is exactly why we don't put it in crawl spaces or against metal. In a roofline application it dries back out and, as above, that permeability is a feature — it won't hide a roof leak from you for two years the way a closed-cell assembly can.
Yes, noticeably better than closed-cell. The soft open structure absorbs airborne sound instead of reflecting it, so it's a good pick for Arlington interior walls, media rooms, shared walls, and second-floor systems. It won't fix footstep noise by itself.
Still deciding? Estimates are free, same-day, and there's no pressure at the end of them. Get a free estimate
Get a free, same-day spray foam estimate from a family-owned DFW crew.
